TIMTER Telemetry Transmitter
The new third generation TIMTER™ offers the finest combination of performance and value on the market. TIMTER™ is available in single or multi-band configurations with an extremely efficient power amplifier capable of delivering up to 25 watts, and plenty of optional add-ons for application-specific tailoring.
4th Generation C-band TIMTER™
Quasonix digital multi-mode telemetry transmitters are the benchmark of the industry, providing unparalleled performance and value, in small, robust, power-efficient packages. The TIMTER™ transmitter, now in its third generation and smaller than ever at 4.1 cubic inches, offers the most versatility of any transmitter in the industry, with advanced capabilities like L/S/C frequency tuning and output power up to 25 Watts.
TIMTER™ Dual Transmitters
Quasonix digital multi-mode dual telemetry transmitters provide the flexibility of two high performance, independent transmitters in one package. The standard 2.0 inch by 3.0 inch design includes a single MDM-15 interface as a primary connector for power, clock and data, and serial communications, while providing two separate RF outputs via SMA connectors. This configuration is ideal for two antenna applications that utilize Space-Time Coding (STC) or Frequency Diversity. The transmitters are designed to transmit airborne telemetry data from a test article to ground stations.
A legacy side-by-side design is employed in applications requiring bands that currently are not available in the Quasonix TIMTER™ Multi-mode Dual Telemetry Transmitter.
Starting at a mere 1.3 cubic inches, our nanoPuck™ transmitter supports the smallest of airborne platforms with programmable multi-mode operation and up to 5 Watts of RF output. The smallest ARTM transmitters now available, Quasonix nano transmitters are ideal for applications with strict SWaP constraints.
MDM-15 RS-422 Wiring Harness
An MDM-15 wiring harness for connecting to transmitters with RS-422 clock and data baseband interface. It includes banana plugs for power and ground, BNC connectors for clock and data, and a DB-9 connector for serial control. The cable is 35 to 36 inches long depending on the connectors.
Ruggedized Handheld Programmer
Want to set up transmitters for operation without the need for a computer or monitor? Check out the TDS Nomad 1050 MHz with the Terminal Program and Quasonix GUI installed. With an intuitive touch-screen interface, all basic settings are provided to get your transmitter up and running quickly. Includes international power adapter, rechargeable Li-ion battery, USB Cable, and stylus. Has a built-in RS-232 Serial Port.
Comes in yellow and dark gray.
Transmitter Digital Frequency and
While the TIMTER™ provides a standard configuration interface that is easily accessible via a computer terminal, some users prefer configuration via an external switch box. The 2nd Generation Quasonix switch box, used with the P9 option, provides six LED digits used to display the mode and frequency. This includes a total of five digits of frequency step up or down, in MHz, and one digit of mode selection in terms of the ARTM “Tier” number. There is also a channel selector for channel 1 or channel 2 when connected to a Dual Telemetry Transmitter. An 18” MDM-9 to MDM-9 cable harness is included.
Transmitter-Powered Heat Sink
The heat sink assembly includes an integral +12 VDC fan and temperature-controlled power on at +37°C. Fan speed is regulated to compensate for changes in air pressure/density under high altitude conditions. Two MDM-15 connectors and a provided pigtail cable allow the heat sink to draw power directly from a TIMTER™ transmitter, eliminating the need for a separate external power supply. Operates from 21 VDC to 34 VDC. The wiring harness connects to any 2″ x 3″ TIMTER™, regardless of MDM-15 gender, by plugging into either the male or female connector on the heat sink. An adapter plate and Bergquist QPAD II thermal pad are also included.
Adapter Plate for 2.5″ x 3.5″ Footprint
This adapter plate allows for the standard footprint 2” x 3” TIMTER™ to be mounted to the larger 2.5” x 3.5” mounting surface occupied by other industry transmitters. Note, this adapter plate is not used with the transmitter-powered heat sink. The appropriate adapter plate is included in the kit.